Protect Your Car From Key Long and Relay Theft With a Ghost 2 Immobiliser
The innovative Ghost immobiliser will safeguard your car from key-long theft and relay theft. With a unique PIN sequence, unless you have the correct code, your car won't be able to start!
It also has Transport Mode that allows you to disable the device temporarily and is perfect for vehicle transport and servicing. It is then activated by entering a PIN again.
No Led Indications or Key Fobs
The Ghost 2 immobiliser offers a powerful defence against modern car-theft techniques. Its undetectable installation and engine stop-blocking will reduce the risk of your vehicle being stolen, which could offer peace of mind and potentially even reduce insurance premiums.
It doesn't emit radio frequency signals, which makes it undetectable by traditional scanners. It's also invulnerable to hacking with common methods, such as key cloning or signal jamming. The device uses buttons in your vehicle, for instance those on the steering wheel and door panels, to create an individual PIN code that can be altered. This sequence can last for up to 20 times. Only the owner of the vehicle is capable of starting the engine when the right sequence or beacon or mobile application is used. This adds an extra layer of protection against thieves.
You can also activate the service mode to help in situations such as valet parking and servicing that require you to temporarily disable the system. The mobile app makes it easy to do this, and ensures that your vehicle is secure when it is being serviced. When the work is done, it is easy to switch back to secure mode. This ensures that your vehicle is secured at all time.
The Ghost 2 is far more practical than other systems that require fobs. The app can be used as a backup key in case of emergency. This allows you to drive while your security is shut off, without needing to enter a PIN number.
No Radio Frequency Signals
The Ghost 2 immobiliser is not like traditional security systems, which require an additional remote control. It is operated using the existing buttons on your steering wheel or console. It's also undetectable by thieves who use RF scanning or code grabbing technology. This means that your car won't start for them even if they do get your keys.
The device locks the engine with an unique sequence of buttons. This unique PIN code can be entered on the app or by using the vehicle's existing buttons on the steering wheel and on the centre console. This will allow you to secure the gearbox as well, meaning your car cannot be taken away unless you have a key or capable of entering your pin code. The device can be set in Transport mode to allow you to drive your vehicle without entering your PIN code. This can provide additional protection for your vehicle when it is left to valet or service park.
The Ghost 2 immobiliser was designed to be as discreet as possible as a theft deterrent. This is a great choice for those who spent a lot on customising their cars or own expensive or unique vehicles. Many people have testified that this is a fantastic option to guard their cars from being stolen and some have even shared stories of attempted thefts that have been stopped by the device. The Ghost 2 is also very versatile. Users have reported that it works with regular keys and with the emergency button on their vehicle, giving them security when they're not in their car.
No Radio Frequency Scanners
Ghost immobilisers guard your vehicle from key copying and theft. The system makes use of the buttons in your vehicle, such as the ones on the dashboard and your steering wheel, to create a unique, changeable button sequence that only you know. Without this sequence, your car cannot start. This unique combination of a disarming sequence as well as the absence of radio frequency signals make the device extremely difficult to penetrate or to bypass.
In contrast to Thatcham approved devices which depend on radio frequency scanning the Ghost CAN Immobiliser is completely silent and doesn't require any external signals to work its magic. It is a safer alternative and is insured if installed by an approved installer of TASSA (we are one of them!) ).
It is highly recommended that you hire a professional installer install the Ghost immobiliser. This is due to how it works with your vehicle. This ensures that it is integrated seamlessly with the vehicle's systems, resulting in maximum performance and a substantially reduced chance of failure.
Professional installation is often accompanied by warranties and support to increase the value of your purchase. This is a significant deterrent for would-be thieves, who are less likely to attempt any attempts at bypassing the device as a result of its extensive security features and skilled installation.
In addition to being an effective deterrent to thieves, in addition to being a great deterrent for thieves, Ghost is designed to be user-friendly as well. It can be set to automatically re-arm after a certain amount of time, which means you don't need to remember your PIN code each time you park your car. It also has a Service/Valet mode for those who want to take your car to valet parking or servicing. It can be activated and deactivated by a simple indicator sequence.
No Wire Cutting
The Ghost 2 is non-invasive and does not require any wire cutting during installation. It connects to your vehicle's CAN data networks and is programmable with a unique PIN. This will prevent anyone else from starting the engine if they do not have a unique sequence of PINs or app authorization.
The device is also undetectable by the sophisticated scanning tools that some thieves use and is quiet because it doesn't transmit radio signals like other immobilisers. It's weatherproof, sealed, and tiny enough to be hidden anywhere in the vehicle making it near impossible to find.
The Ghost II also has the ability to be placed into a 'transport mode, which enables it to be used for short periods of time without the need for an individual PIN. ghost immobiliser is ideal in situations such as giving the car to a family or friend member or in an emergency. You can start your vehicle quickly and securely.
It's important that you work in a well-lit area when installing the Ghost II. You should wear safety gear when working with electrical components and tools. A basic set of tools will help you make precise connections. A multimeter can help verify electrical values, and ensure that your wiring is safe. Cable ties and insulation tape can be used to shield or join any exposed or cut wires that are exposed during the installation process.
It is also essential to disconnect the battery before beginning any wiring work on your vehicle. This will prevent any accidental airbag deployments or electrical shocks from occurring when the battery is accidentally disconnected while the Ghost II is still connected to the system of your vehicle.
Easy to Install
The Ghost immobiliser, a unique device of the next generation, functions by connecting directly to your vehicle's CAN Data Network. It uses a personalised pin code to prevent it from starting. This makes it much harder to hack than standard key fobs or alarm systems and offers greater protection against key cloning hacking, and relay attacks.
The device can be hidden in your vehicle, and it makes use of the buttons on your dashboard and steering wheel to create a unique sequence that you are the only one to know. This blocks thieves from being able to use a cloned key to start the car. It can also stop them from using the diagnostic tool that is based on hacking into the OBD.
Installation is easy and does not require cutting wires. The unit is connected to the vehicle's CAN bus using a continuous 12V supply as well as a grounding connection. Basic hand tools are sufficient to install the unit, and a multimeter can assist with pinpointing the correct wires. Insulation tape or heat shrink tubing is suggested to protect the connections, and cable ties can be utilized to keep the wiring neat and organised.
After installation, the unit enters into a learning mode that captures your specific buttons or sequences to create your unique pin code. This information is later stored in the CAN data network, which makes it impossible for anyone else to replicate your sequence and even start your vehicle.
If you ever forget your PIN Code, sell your car or the button becomes inoperative, there is an emergency override option called Transport Mode. This will shut down the Ghost System completely, but it will automatically reactivate when you go over 31mph for more than 15 minutes or enter your PIN Code. This is great for those who rent their vehicles frequently through services like Turo or ZipCar.