Ghost Immobiliser Fitting
Guard your car from theft of keys, cloning and hacking with the world's first aftermarket immobiliser for CAN. The Ghost app and GPS tracking can be connected to the immobiliser to give you alerts when your vehicle is taken or damaged.
The installation of the Ghost immobiliser is done by a certified technician. It is crucial to have the appropriate tools and heat shrink tubing.
Getting Started
In contrast to physical security devices such as wheel locks or car alarms, ghost immobilisers guard your vehicle without the need for LEDs or key fobs. what is a ghost immobiliser are directly connected to the ECU CAN data network and are activated only after entering a PIN code. This provides a higher level of protection against key hacking, ECU swapping and cloning.
Installing a ghost immobiliser Birmingham requires a high degree of agility and precision. It's like walking through a minefield. One misstep could cause serious damage to your vehicle's circuits. To avoid this, it's crucial to be aware of the process of installation and prepare your vehicle for the installation process.
It is necessary to remove interior panels from the vehicle to make room for the immobiliser. Once you've found the perfect location to hide it and secure it using cable ties to prevent it from being taken away or tampered with. Then, tidy up the wiring by tying loose wires and using insulation tape or heat shrink tubing to cover exposed connections. This will minimize the risk of short circuits that are not intended to be there while also improving aesthetics and reducing the chance of tampering from thieves.
Find a source of constant 12V power and a grounding source for the ghost immobiliser. Once you've found these, test the power wires using a multimeter to ensure they're delivering the same voltage. Connect the CAN H and CAN L wires of the immobiliser to the grounding and power points.
Once you've made all of the necessary connections It is important to check them and inspect the immobiliser for signs of corrosion or damage. By entering a PIN and then starting the vehicle is a great method of testing the system. This should be part of your daily routine as it will allow you to identify any issues that may arise early. Regular testing will help prolong the life of your device, and keep it running at its peak.
Preparing the vehicle
Installing a Ghost immobiliser is a process that requires knowledge and tools. A wiring diagram of the vehicle is crucial to identify the proper wires and making precise connections. A multimeter can help verify the electrical value and ensure safety. Insulation tape and cable ties can be used to shield connections from being tampered with and to ensure they are secured. A user manual is available for the Ghost Immobiliser. It will give you specific instructions tailored to that model.
Once installed the ghost immobiliser will stop unauthorised engine starts by requiring the owner to enter a unique PIN sequence through existing buttons in the steering wheel or centre console. The code can be altered at anytime by the vehicle owner by hand or remotely through a mobile app. The device also operates silently and is undetectable to thieves since it doesn't emit radio frequencies.
Ghost immobilisers are directly connected to the CAN bus of the vehicle, a network which communicates with the electronic control units (ECUs) of the vehicle. It intercepts signals from the ECUs and stops the engine from starting when the ECU detects a false signal. The system is tamper-proof and weatherproof, and does not include key fobs or LED indicators to attract the attention of thieves.
It can be positioned behind or in a less visible area so that it's not easily spotted by thieves and does not interfere with vehicle's performance. It can be mounted in a small container so it is less likely to be noticed by untrustworthy salespeople during a test drive.
Its sly operation, coupled with its integration into the CAN-bus system of the vehicle, is a powerful deterrent to modern vehicle theft techniques, like signal relay attacks and key copying. Combining the system with other security measures will create a powerful barrier to frustrate even the most persistent of thieves. This is why more and more insurance companies are now recommending or even requiring ghost immobilisers be installed, since they can drastically reduce monthly premiums.
Making Connections
Contrary to traditional security systems which can be heard by thieves, ghost immobilisers work silently to keep them from being aware that your vehicle has been switched on. They also block high-tech methods used to steal vehicles like OBD port hacking. Installing them without leaving permanent marks on your vehicle is an ideal option for those who plan to sell the car in the near future.
The Autowatch Ghost 2 is a immobiliser for CANbus that is one of the most reliable and current solutions to protect your car from theft. It disables your engine using the CAN data network and creates a unique PIN code, which is difficult for criminals to guess. It is compatible with many different automobiles, and it can work with all the features that are already in place including car alarms and steering wheel locks. GPS trackers and door lock bypass.
If you opt to use a Ghost immobiliser for your vehicle, be sure to refer to the wiring diagram to identify the wires to connect. Double-check the locations of these wires to ensure that they are in the correct location and mark them with labels or tape to help you keep the track of them. It is also necessary to find a source of constant power (12V) and an earthing point for the system. Once you have the necessary components, you can start making connections to complete the installation.
The ghost immobiliser won't allow your vehicle to start until a pin code is entered through the buttons of the dashboard or steering wheel. This will stop ECU hacking keys cloning, hacking, and other methods of theft. Additionally, it can be paired with other approved by Thatcham security accessories, such as alarms and tyre clamps, to provide your vehicle with an additional degree of security.
As the UK automotive aftermarket industry continues to grow and expand, so do the options to secure your vehicle. With so many ways for thieves to gain access and steal your car, it's vital to do everything you can to protect it from being stolen. That's why ghost immobilisers have become such a popular choice among responsible car owners.
Testing the System
The Ghost Immobiliser uses a CAN data network to communicate with the vehicle's ECU and prevent the engine from starting until a specific PIN code is entered. This makes it difficult for thieves to copy your key fob to open your vehicle, and difficult to disable the system by hacking its electronics.
Ghost Immobilisers can also be used with GPS tracking devices to assist you to locate your vehicle in the event that it's stolen. This is a feature that is not commonly found in aftermarket security products however it's an excellent way to improve your vehicle's security, and give you peace of peace of.
In addition to providing increased security, in addition to providing enhanced security, the Ghost-II immobiliser also provides a comfortable user experience by eliminating the requirement for additional key fobs or devices. It features an easy and intuitive PIN code entry system that is seamlessly integrated into your daily routine. It also has convenience features and deactivation settings that let you temporarily disable the immobiliser in order to park or service your vehicle.
Make sure you have the tools you need and get familiar with the wiring of your vehicle. A basic set of hand tools will allow you the ability to make precise connections, and a multimeter is a great tool to verify electrical values. Insulation tape and heat shrink tubing are also crucial for securing connections from short circuits, while cable ties can be used to hold the wire in the correct position. Additionally, it is essential to work in a well-lit area and wear safety gear when working with tools and electrical components.
After you've completed the installation you must test the Ghost immobiliser to make sure that it's working properly. First, you should try to start the vehicle without entering the PIN code. If this doesn't work then you'll need to test again and examine the connections more carefully.
Unlike other security systems unlike other security systems, the Ghost Immobiliser is a covert device that cannot be detected by thieves and is much more effective than traditional physical deterrents such as wheel clamps or steering locks. It is TASSA-approved and endorsed by some insurance companies. This makes it a cost effective investment that provides you with the peace of mind you deserve.